Brand Name : Lanying
Model Number : LY-DGM
Certification : MSDS, ROHS
Place of Origin : Guangdong, China
Material : Organic Silicone
Product : Mold silicone
Classification : Two-component condensed
Mixing Ratio : 1:1
Color : Colorless
Hardness : 25~30 shore A
Application : Cake, Candle, Jewelry mold making
Packing : 20kg/drum
Cake mold silicone is a two-component addition molding liquid silicone, its characteristics
1. Non-toxic, no side effects, environmental protection;
2. No oil, no stickiness, tear resistance;
3. Low viscosity, good fluidity, fast defoaming, many times of turning back, high temperature resistance;
4. It can be cured by heating or at room temperature.
Application
1, 0 degree super soft, generally used for silicone dolls, human skin, adult products
2, 5 degree softness is general, generally used for fondant molds, soap molds, pad printing rubber heads, etc.
3. 10-20 degrees is suitable for handmade soap, candle crafts, chocolate candies and plaster thread, etc.
4. 25-30 degrees is used to brush molds in pieces, such as cement products, sandstone reliefs, resin crafts, tire molds
Attentions
1. Mix A and B according to the mass ratio of 1:1;
2. Vacuum the AB glue after mixing; if it is not vacuumed, the bubbles can be discharged naturally, but it will affect the operating time;
3. Slowly pour the silica gel without bubbles into the mold to completely cover it, and let it stand for curing;
4. Take out the mold after it is completely cured, and cut off the corners. Generally, the service life of the mold can be prolonged by using it 24 hours after the mold is made.
30A RTV Two Part Silicone Rubber Images |